top of page
dealing-with-mold-01.jpg

&

Remediation

Do you smell something suspicious in your home? It could be mold. ATP Environmental Solutions provides 24 hour, emergency mold removal and remediation services; no job is too large or too small. We provide call backs within 30 minutes so you can get the mold removed from your home as quickly as possible.

Mold Removal

ATP will work directly with your insurance company to make sure the mold is removed from your home in the best possible way, with as little out of your pocket as possible.

We make homes, schools, investment properties, and businesses safer for the people inside by removing mold (including black mold) and preventing it from coming back. ATP Environmental Solutions also specializes in removing mold from yachts and water vessels. Our professionally trained, licensed, and certified mold removal specialists can quickly remediate biological toxins that can cause multiple public health hazards.

Common Sources of Mold

  • A/C Leaks

  • Broken Pipes

  • Garbage Disposals

  • Toilets

  • Water Heaters

Comprehensive Mold Analysis

Once a comprehensive analysis has been performed, we then remove the identified risk factors (toxic molds, fungi, etc) that are associated with negatively affecting human health. It is important to remove dangerous mold as soon as possible; call (561) 337-0805 or send us an email to schedule our mold removal services.

  • Phase 1
    Mold Detection and Discovery Visual Assessment of Your Home Starting at $125.00. ATP finds the mold. Our specialized on-site mold detection service includes a visual inspection of your property.
  • Phase 2
    Pre-Testing Third Party Verification ATP determines whether the mold is toxic. A certified independent laboratory analyzes the test cultures to identify the mold species as well as the total colony forming units (CFU). If Biological risks are identified, ATP prepares a comprehensive report to explain the specific biological risks and develops a customized treatment plan. This report is then reviewed with our clients in the strictest of confidence.
  • Phase 3
    Mold Treatment ATP applies the TM-100 Formula. Professionally trained technicians apply the TM-100 technology by utilizing our proprietary atomization process, which allows TM100 to be surface applied and injected behind walls or into air vents to treat hidden toxic molds. All work is performed at the convenience of our clients, including off hours, evenings, and weekends.
  • Phase 4
    Post-Testing Third Party Verification ATP provides provides certified results. Within 72 hours after a treatment plan has been completed, ATP repeats the above mentioned comprehensive on-site biological collection protocol and a certified independent laboratory analyzes the test cultures. Data from the Pre-Testing and Post-Testing results are analyzed and a comprehensive report is prepared and made available to the client on a confidential basis, thus providing a scientifically based assurance that the indoor air quality (IAQ) is safe.
  • Phase 5
    Mold Prevention ATP offers mold prevention and maintenance plans tailored to our clients specific needs to prevent further outbreaks of biological toxins.

About TM-100 Non-Toxic Mold Cleaner/Fogging applicator

The most important factor in mold remediation is to clean-up not only the active mold growth, but also the residual airborne spores and treatment of the HVAC system if applicable. TM-100 is our key to doing this effectively, quickly and more affordable than traditional remediation practices. TM-100 is molds natural enemy, a complex blend of enzymes that biodegrades the mold spore leaving behind only a fresh scent.

TM-100 digests mold spores on contact and is designed to leave behind a safe, organic "barrier" which inhibits mold re-growth.

We are one of only a few companies that are permitted to use TM-100, which is our natural, non-toxic mold cleaner. This fantastic product is safe for both humans and pets and is fully guaranteed.

Environmental Health: Mold remediation service offers proprietary enzyme formulation

Published in Biotech Business Week, January 31st, 2005

 

ATP Inc., has developed an environmentally safe proprietary enzyme formulation, called TM-100 MCF, which breaks down and digests mold. U.S. Occupational Safety and Health Administration (OSHA) performed a volatile organic compound (VOC) test on the TM-100 and it was found to be safe for humans and pets. A scientific toxicology report was also performed by GZA Environmental and the five enzymes used are on the U.S. Food and Drug Administration's generally regarded as safe (GRAS) list. The process normally takes about 24 hours. ATP does not believe deconstruction/construction is necessary unless building materials.

Fungi and bacteria are the main cause of airborne or direct contact diseases affecting animals and humans. Studies show the application of TM-100 MCF Technology via fogging significantly reduces the number of fungi/mold. TM-100 MCF fogging application produces micro droplets that float in the air after application, reaching the most inaccessible parts where conventional cleaning or spraying can't reach.

  • Phase 1
    Mold Detection and Discovery Visual Assessment of Your Home Starting at $125.00. ATP finds the mold. Our specialized on-site mold detection service includes a visual inspection of your property.
  • Phase 2
    Pre-Testing Third Party Verification ATP determines whether the mold is toxic. A certified independent laboratory analyzes the test cultures to identify the mold species as well as the total colony forming units (CFU). If Biological risks are identified, ATP prepares a comprehensive report to explain the specific biological risks and develops a customized treatment plan. This report is then reviewed with our clients in the strictest of confidence.
  • Phase 3
    Mold Treatment ATP applies the TM-100 Formula. Professionally trained technicians apply the TM-100 technology by utilizing our proprietary atomization process, which allows TM100 to be surface applied and injected behind walls or into air vents to treat hidden toxic molds. All work is performed at the convenience of our clients, including off hours, evenings, and weekends.
  • Phase 4
    Post-Testing Third Party Verification ATP provides provides certified results. Within 72 hours after a treatment plan has been completed, ATP repeats the above mentioned comprehensive on-site biological collection protocol and a certified independent laboratory analyzes the test cultures. Data from the Pre-Testing and Post-Testing results are analyzed and a comprehensive report is prepared and made available to the client on a confidential basis, thus providing a scientifically based assurance that the indoor air quality (IAQ) is safe.
  • Phase 5
    Mold Prevention ATP offers mold prevention and maintenance plans tailored to our clients specific needs to prevent further outbreaks of biological toxins.
Untitled design (3).jpg

Biocides are toxic chemicals

  • Hydrogen peroxide

  • Potassium peroxymonosulfate

  • Polyaminopropyl biguanide:

  • Hypochlorite – (chlorine, bleach)

  • Formaldehyde (formalin):

According to a Harvard University School of Public Health study, over 50% of our homes have indoor mold.  And once you have mold spores, it's incredibly easy for those spores to latch on to a moist surface and multiply. That leaves a lot of families vulnerable to the possible health effects of indoor mold:

  • Watery or itchy eyes

  • Sore throat

  • Congestion

  • Coughing

  • Skin irritation

  • Asthma

  • Respiratory problems

In fact, a study at the University of Arizona suggests that mold spores are a suspected cause in the tripling of the asthma rate in the past 20 years.  By knowing the facts or all about mold, you can better keep your home and family, safe and healthy.

Typically mold needs three conditions to grow

  • Moisture from humidity, leaks or flooding

  • Nutrients: organic materials that can act as a food source

  • Optimal temperature, generally between 64-82 degrees.

These elements can create a mold problem that can colonize and multiply quickly in as little as 24-48 hours.

For decades, the answer to mold problems has always been bleach. We'd spray it on, cover our eyes and run for cover from the toxic fumes.  And although the mold would disappear, it was only weeks before it was back again.

Why? Because bleach isn't effective against mold as it leaves the roots of mold intact and ready to return.  That's why we think it's time to ditch the bleach.

TM-100 works to eliminate the mold spores at the root of the problem, and remain on the surface to prevent mold.  TM-100 Technology is the safe way to eliminate mold with no bleach, ammonia or toxic chemicals.

Untitled design (4).jpg

What is TM-100?

TM-100 is an organic formula that is not toxic to pets, people, plants, clothing, furniture and carpets. The product is safe both during and after application, according to OSHA. It is effective on drywall, framing, flooring, clothing and furniture. All five enzymes used to create TM-100 are on the FDA's GRAS (Generally Regarded As Safe) list. Copies of the reports are available upon request.

  • Phase 1
    Mold Detection and Discovery Visual Assessment of Your Home Starting at $125.00. ATP finds the mold. Our specialized on-site mold detection service includes a visual inspection of your property.
  • Phase 2
    Pre-Testing Third Party Verification ATP determines whether the mold is toxic. A certified independent laboratory analyzes the test cultures to identify the mold species as well as the total colony forming units (CFU). If Biological risks are identified, ATP prepares a comprehensive report to explain the specific biological risks and develops a customized treatment plan. This report is then reviewed with our clients in the strictest of confidence.
  • Phase 3
    Mold Treatment ATP applies the TM-100 Formula. Professionally trained technicians apply the TM-100 technology by utilizing our proprietary atomization process, which allows TM100 to be surface applied and injected behind walls or into air vents to treat hidden toxic molds. All work is performed at the convenience of our clients, including off hours, evenings, and weekends.
  • Phase 4
    Post-Testing Third Party Verification ATP provides provides certified results. Within 72 hours after a treatment plan has been completed, ATP repeats the above mentioned comprehensive on-site biological collection protocol and a certified independent laboratory analyzes the test cultures. Data from the Pre-Testing and Post-Testing results are analyzed and a comprehensive report is prepared and made available to the client on a confidential basis, thus providing a scientifically based assurance that the indoor air quality (IAQ) is safe.
  • Phase 5
    Mold Prevention ATP offers mold prevention and maintenance plans tailored to our clients specific needs to prevent further outbreaks of biological toxins.
bottom of page